Standard Configuration?
- This topic has 1 reply, 1 voice, and was last updated 3 years, 3 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
What’s the standard configuration of the 440 system?
The standard configuration for the 440 System is 110V Power, and RS232 Comms. This can be altered depending on client requirements.
The system has an option of 110V or 240V power, and can be changed by replacing the board within the 440 PSU Pod.
Comms can be configured for RS232, 2CL, or 4CL. This can be altered by changing the comms links on the main board within the SEP. If the comms links are changed, the topside comms cable must be wired accordingly, and the switch on the back of the SDC must be moved to the corresponding position.Please ensure the power and comms settings are clearly labelled on the 440 pods prior to despatch.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.